Mac hard drive upgrade guide

Processor options include 3. Jtsternberg jtsternberg. AS the title suggests. Aaron Cooke.

About the Author

Nope, it's not possible. The flash storage chips are soldered to the logic board. You're stuck with what you get. I agree with them on that one. It's becoming hard to stay loyal to the current version of Apple. Unfortunately I am a web developer, and while things are becoming more windows-friendly, Macs are still the primary environment used, and tooling is geared for it. I think I'll be with apple for a bit longer. Have you ever heard of a Hackintosh? I have! Show 10 more comments.

How to Remove a Macbook Pro Hard Drive (with Pictures) - wikiHow

Not worth it to me. Jeopardize warranty and Apple quality. Just me I guess. February 9 by Wayne Gale. Posted: February 8. This is the only solution for the Drive upgrade in that Mac Mini February 22 by Dan. Ollie Simpson. Posted: June Posted: 6 days ago August 9, The inability to increase hard drive space would not be a problem for me if Apple didn't require bundled applications I never useā€¦ e.

Chess, et. Help Translate iFixit. Back Answers Index. You will be accessing the back panel of the MacBook. Set it on a table or workbench that gives you easy access without having to bend over. Remove the ten screws securing the back panel. These run along the edges of the bottom panel. The exact location of these screws varies by model, but there are always ten. You will need a Phillips screwdriver to remove them.

How to replace and upgrade a MacBook Pro hard disk

There are usually two types of screws: Seven 3 mm Phillips Three Lift the lower panel. Wedge your fingers into the gap between the vent and the lowercase and pry the panel up. You will release two clips securing the panel as you do so. Disconnect the battery connector. This connector provides power to the logic board, and should be disconnected before continuing to prevent shorting out any components.

It is black and located along the edge of the logic board, and is the largest connector attached. Make sure to pull the connector straight out so as not to damage the connection. If there is a tab connected to the battery connector, use it to pull it out of the socket. If there is no tab connected, you can use a spudger or cocktail pick to push the connector out.

Locate the hard drive. The hard drive is rectangular and will be located in one of the corners. Most hard drives have labels indicating their storage and speed, so check the label if you aren't sure. Many hard drives have shiny metal exposed, though not all of them do. Remove the screws securing the drive.

How to Upgrade the Hard Drive or SSD in a 13-inch MacBook Pro (Mid 2012-present)

There will be two small Phillips screws securing the hard drive into place. These two screws run alongside one edge of the hard drive, and must be removed to free the drive.


  1. Introduction.
  2. how to play games on mac from itunes.
  3. TechRadar pro?
  4. mac os x snow leopard 4.7gb.
  5. mac and cheese with heavy cream and eggs.

The screws will remain attached to the bracket that is holding the drive in place. Lift the bracket out. Once you have loosened the screws, you can pull the bracket they are attached to directly out of the case. Pull the tab protruding from under the drive. Gently pull the tab to extract the hard drive from the housing. Don't pull it all the way out, as there is still a cable attached underneath. If there is no tab affixed you can use your fingers to gently lift the drive out.

Disconnect the hard drive. Grab both sides of the connector attached at the top of the hard drive. Pull it straight out of the hard drive. It may be securely connected, so "walk" the connector out by gently pulling alternate sides of the connector. Pull the hard drive completely out of the MacBook so that you can access the screws on the sides of the drive.

Remove the screws from the hard drive. The hard drive will have four T6 Torx screws, two on each side. These are used to secure the drive in the bay. You will need to screw these into your new hard drive, so set them aside. Ensure that your new drive is compatible. The hard drive must be a 2. It can be either a standard hard drive or a solid-state drive SSD.

An SSD will provide significantly quicker loading times, but are typically much more expensive than traditional hard drives. Screw the four Torx screws into the drive. Install the four Torx screws into the same holes that they came out of on the old drive. Hand-tighten them, but do not over-tighten as you could damage the hard drive case.

You can re-affix the pull tab too if you'd like. Stick it to the underside of the drive making sure not to contact any circuitry so that the tap sticks up when the drive is inserted. Connect the hard drive cable. Insert the large hard drive connector directly into the slot at the top.

Why You Might Benefit from Learning How to Replace a MacBook Pro Hard Drive

It can only go in one direction. Make sure that the connector is secure and completely inserted. Lay the hard drive in the bay. Gently rest the hard drive into the bay, ensuring that it is lined up properly. The Torx screws on each side should fit into grooves that keep the hard drive in place.

Secure the bracket. Reinsert the bracket to the side of the drive and secure it with the two screws. Again, hand-tighten but do not over-tighten the screws.